Synthetic Grass Tennis Court

tenis sentetik çim

Synthetic Grass Tennis Court is built according to the standards set by the International Tennis Federation (ITF). According to these standards, the tennis court construction area was determined as 36 meters in length and 18 meters in width, and 648 square meters in total. Synthetic grass tennis courts can be built in any size needed for amateur uses, apart from international dimensions.

Having gained expertise in the construction of Synthetic Grass Tennis Courts, vsm Sports realizes the construction of tennis courts with synthetic floors on a turnkey basis in a short period such as 3-4 weeks.


Synthetic Grass Tennis Court Construction
tenis sentetik çim2

Synthetic grass tennis courts can also be made smaller than the area for amateur use, apart from the dimensions of 18mx36m. We have special tennis carpet models for the construction of synthetic grass tennis courts. Our artificial grass tennis carpet models are available from 15mm pile to 30mm pile. Our 26mm carpet model is generally preferred for tennis artificial grass carpets.

Phase 1: Infrastructure Works

  • Excavation: The ground planned to be built as a tennis court is leveled. The foundation is dug for the beam formwork that will go around the entire perimeter of the field.
  • Environmental Beam Concrete: Mesh is made by using 8 and 12 Q iron bars for the beam.
  • Anchorage: In order to connect the main poles of the fence to be positioned within the perimeter beam, 3” anchor pipes are placed at regular intervals by being leveled.
  • Beam Concreting: Ready-mixed concrete in the form of BS 20 is poured into the perimeter beam formwork.
  • Drainage System: Drainage channels are opened in order to prevent water accumulation on the court. When the field drainage system is completed with the appropriate material, these channels are covered and reset with the ground.
  • Field Filling: The floor of the tennis court is covered with gravel-filling material.(In the construction of Synthetic Grass Tennis Courts, concrete can be poured on the substrate as well as asphalt application. Here, the concrete application is explained as a sample construction process.)
  • Field Concreting: Ready-mixed concrete is poured on the crushed stone and polished thoroughly with the “helicopter finishing” method.

Stage 2: Perimeter Poles and Wire Fence Works

  • Support Poles for Fence: Vertical pole pipes are welded to the anchor pipes placed on the line, and support pipes are attached to these pipes as upper, middle, and horizontal.
  • Reinforcement Pipes for Fence: Reinforcement is applied diagonally to horizontal pipes located at all four corners. Vertical reinforcement pipes are installed at regular intervals on the vertical pipes on the four sides of the field.
  • Lighting: Lighting poles with ladders are placed on the long sides of the tennis court. Metal-formed halide projectors with 400 W lighting capacity are placed on the lighting poles. The projectors are brought into working condition by laying the electrical infrastructure and installation in a way that can safely meet the energy requirements of the project.
  • Door Installation: One hinged door is made.
  • Net and Poles: Considering the compliance of the court with the standards, the most suitable points are determined for the net rod in a mutual way. After the application of the synthetic grass carpet coating, the poles are fixed in place.
  • Fence Tension: Wire mesh with 4×4 cm mesh, galvanized by dipping method, and PVC-coated wire mesh is stretched to the poles around the court, and the entire court is surrounded by a fence. It is also reinforced with the help of steel ropes connected with terminals.